Soft Foot Detection & Verification
Sometimes Simple Problems Need Advanced Solutions
A routine vibration check on an edge cutter identified a possible soft-foot issue. This was confirmed with and old-school analogue approach and corroborated using latest video deflection technology; seeing the unseen! with DragonVision.
Non-Contact Video Deflection Selected
Routine vibration data was collected from the cutter bearings indicated below.
Analysis
During analysis of the velocity data it was noticed that the 1x rpm of the cutter was high. The missing bolt was an indication also and was replaced…
Testing the Theory
To confirm this was in fact the problem causing the high 1x vibration, a motion video of the foot was taken using Erbessd Dragon Visio video deflection technology. The resultant video helped demonstrate the problem to our client.
The video was shot using an iPhone 6, with no special lighting. The 30 second clip took 20 minutes to adjust in the Dragonvision software to come up with a good representation of the fault.
The floor underneath the foot has crumbled away, probably caused by how the initial product is introduced to the machine (high loads).
Completed Video Deflection Model
The recommendation is to rebuild the floor under foot either by using epoxy resin or remounting the whole cutter as well as considering how a product is introduced to the machine.
Whilst not urgent; if the soft-foot fault is not addressed the machine will go in and out of alignment which is likely to cause a rub on the bearings (there is also a history of this machine whereby the motor overheats and trips-out).
In less than 10 minutes a problem that had been studied for nearly 30 man hours was solved using DragonVision Video Deflection Technology. Are you ready to See the Unseen?
Oliver Mottersead, B.Sc, stands out as an expert in predictive maintenance and a respected leader in the industry. Originally from the United Kingdom, he is a Certified Maintenance and Reliability Professional, as well as a Certified Vibration Analyst. In his role as Managing Director of Erbessd Instruments – Europe, Oliver oversees sales support and distribution, in addition to handling training and technical services for the European market. His leadership and technical knowledge solidify him as a key figure in the evolution of predictive maintenance in Europe.
ERBESSD INSTRUMENTS® is a leading manufacturer of Vibration Analysis Equipment, Dynamic Balancing Machines, and Condition Monitoring with facilities in Mexico, the USA, England, and India.
