Machine Specs
| Max symmetric load | 30 kg (66 lb) Pair / 15 kg (33 lb) Each |
| Dimensions (W x H x D) | 590 x 444 x 614 mm (23.2 x 17.5 x 24.2in) |
| Weight | 30 kg (66 lb) |
| Max rotor diameter | 279 mm (11 in) |
| Max Vibration displacement | 12 mm (0.5 in) |
| Max Shaft diameter | 50 mm (2 in) |
| Shorter distance between supports | 76 mm (3 in) |
| Longest distance between supports | 530 mm (21 in) |
| Power transmission | Flat Belt |
| Lubrication | Type-I (manual) |
| Accuracy | ±0.01 mm/s |
| Accelerometer’s sensitivity | 100 mV/g |
| Speed driver | Input: 120/240 VAC Output: 0 – 90/180 VDC |
| Motor | 124 W (1/6 hp) 90 VDC / 1.8 A 1800 RPM |
Devices for Balancing
Tachometer (1)
- Digital output
- Range: 1 – 5000 Hz
- Power supply: 5 V
- Current: < 30 mA
- Voltage drop: <0.4 V
- Short circuit, reverse voltage, and Over-Voltage protection
- Operating temp: -10 – 50 °C
- Protection grade: IP 60
- Operation Distance: up to 5m
- Weight: 28g
- Includes Magnetic base
- Detect your vibration peaks on your balancing process with our tachometer
4-Channel Interface (1)
- Sample Rate: 48,000 Hz
- Frequency Range: 0.5 – 10kHz
- Operation temperature: -10°C to 65°C
- Protection Grade: IP67
- Material: Ballistic nylon
- Weigth: 100gr
- Dimensions: 67x74x22 mm
- 3 Input 5-Pin LEMO connectors.
- Up to 4 mono-axial accelerometers.
- 1 tri-axial & 1 mono-axial accelerometer.
- Compatible with 5V sensors
- Allows you make balancing process in two planes
Accelerometers (2)
- Dynamic range: 80 g peak
- Freq. response (+- 3dB): 0.4 – 13,000 Hz
- Freq. response (+- 10%): 1 – 9,000 Hz
- Sensitivity: +- 10% = 100 mV/g
- Transverse sensitivity: < 5%
- Power supply: 18-30 V / 2-10 mA
- Short-circuit protection
- Operation temp.: -50 – 121 °C
- Protection grade: IP 68
- Weigth 51g
- Case Material: 316L Stainless steel
- The turbo balancing machine includes a screw thread where you can place the accelerometers
Accessories & Spare Parts for the Balancing Machine
The EI-30 is a Horizontal Turbo Balancing Machine with a wide range of optional accessories and spares to increase performance and reliability.
Transmision belt
The Horizontal Balancing Machine transmission belt is a flat belt of high strength and durability reinforced with 3 layers: fabric-nylon-fabric without seams or staples. Length: 1.6 m (65 in).
Negative Load Supports
It’s an accessory for the EI- 30 Horizontal Balancing Machine required to secure rotors with high levels of vibration, like crankshafts. Each support includes bearings and has adjustable height.
Pulley Set
Set of 3 bearing pulleys and 1 driver pulley for EI-30 flat belt.
