Multiparameter Sensor | Vibration, Current Temperature
Phantom All in One (EPH-U14) | Vibration, Current Temperature
Meet the new member of the Phantom family. Take 3 types of measurement parameters with only one module: Vibration, Current and Temperature. Our Phantom condition monitoring system will help you to predict machine failures and save huge amount of costs due to non-programmed down times in production.
Vibration
Vibration Phantom is the best all-inclusive battery powered wireless machine monitoring system worldwide. Phantom records vibration FFT from 3 axes simultaneously X, Y and Z.
- Triaxial
- Full waveform and spectrum data
- Programmable Internal RMS Trigger
- Maximum 6400 Lines of Resolution
Current
Current Phantom is a Wireless Current Sensor (Amperage) which uses a simple Current Transformer for monitoring. Easily monitor the AC electrical current of your machines and devices.
- 1 split core current transformer.
- Available clamps from 50 to 500 Amp (not included).
Temperature
Temperature Phantom is a Bluetooth Temperature Sensor designed to monitor Machine high temperatures. Easily connect any type K Thermocouple sensor (not included). This Wireless Thermocouple Sensor can record accurately from -210ºC up to 1,800ºC.
- Compatible with type K sensors (not included).
- Easy to install.
- It can sensor from -210°C to 1800°C.
Main Features
- Full waveform and spectrum data
- Configurable Alarm interval
- Battery life enough to take up to 100,000 measurements
- Configurable Measurement Interval
- Measures 4 Channels simultaneously.
- Compatible with type K sensors.
- Measures 4 Channels simultaneously.
- Compatible with 50A, 100A, 250A and 500A clamps
- IP67 Design for protection from liquid and dust
MEASUREMENT
Vibration | |||||
| Part number | Vibration sensor | ||||
| Sensor | MEMS tri-axis accelerometer | ||||
| Frequency Range (@25600 SR) | 10kHz (x,y); 5.1kHz (z) | ||||
| Dynamic Range | 8 / 16 / 32 G | ||||
| Internal Temp. Accuracy | ±5°C | ||||
| Status (Every 5min) | Internal RMS, Battery, Temperature, Alarm | ||||
| Recording Time (s) | 1 | 2 | 4 | 8 | 16 |
| Sample Rate (Hz) | 25600 | 12800 | 6400 | 3200 | 1600 |
| Max Frequency (Hz) | 10000 | 5000 | 2500 | 1250 | 625 |
| Lines of Resolution | 6400 | ||||
| Data Interval | 10 minutes Configurable or Specific Daytime | ||||
| Alarm monitoring | 2 – 120 sec. | ||||
| Spectral Noise | 630 µg/√Hz | ||||
Current | |||||
| Part Number | Current Module | ||||
| Sensor | Split Core Current Transformer sensor | ||||
| CT sensor compatibility | 50 / 100 / 250 / 500 Amp | ||||
| Frequency Range | 50 – 60 Hz | ||||
| Accuracy | ±5% | ||||
| Â | Â | ||||
| Internal Temp. Accuracy | ±5°C | ||||
| Measurement (RMS AC Current) | Minimum / Maximum / Average / Amp Hour | ||||
| Data Interval | 30 min / Configurable | ||||
| Notes | Â | Only for monitoring AC voltage | Â | Â | Â |
Temperature | |||||
| Part Number | Temperature sensor | ||||
| Sensors Compatibility | Thermocouple type K | ||||
| TemperatureRange | Ambient | – 40 to +80 °C | |||
| Object | – 210 to +1800 °C (Depends on Thermocouple) | ||||
| Internal Temp. Accuracy | ±5°C | ||||
| Status (Every 5min) | Battery, Temperature sensor, Temperature object | ||||
| Data Interval | 30 min / Configurable | ||||
| Accessories Included | Thermocouple type K | ||||
CONNECTIVITY AND SOFTWARE
| Wireless Protocol | Bluetooth BLE 5.0 / Modbus via Gateway | ||||
| Operating Frequency | 2.4 GHz | ||||
| Power Output Range | -4dBm to +8dBm (Configurable) | ||||
| Signal Strength Range | -90dBm to -30 dBm | ||||
| Wireless Range | 100m Line sight | ||||
| Software Compatibility | DigivibeMX Phantom version, WiSER VIBE | ||||
| OTA firmware update via Phantom Manager app (iOS / Android) | |||||
POWER SUPPLY
| Main Power | 2 x Battery AAA 1.5V (Replaceable) | ||||
| Battery Life Time | 2-3 years* | ||||
| Standby mode if Gateway not detected | |||||
DIMENSIONS AND FIXTURE
| Dimensions (d x h) | 100mm x 77mm x 26mm | ||||
| Weight | 138gr | ||||
| Enclosure Material | Nylamid / Aluminum | ||||
| Protection Rating | Water and dust resistant IP67 | ||||
ENVIROMENTAL CONDITIONS
| Base Temperature Range | -40 to +85 °C (-40 to +185 °F) | ||||
