Improve the performance of your equipment with original accessories and spare parts.

Electronic Supplies
i400 Interface
2 channel interface with 5-pin connectors for 2 accelerometers and 1 optical sensor.

Includes calibration device and USB cable.
Datasheet See on store
i500 Interface
2 channel interface with 4-pin connectors for 2 accelerometers (18-30V @3-8 mA CC) and
a 5-pin connector for optical sensor (5V).
Includes calibration device and mini USB cable.
Datasheet Buy now
Optical Sensor

Laser Optical Sensor designed in aluminum, integrates a voltage regulator, amplifier and anti-aliasing filter.

Easy to use, includes protection system against short circuits, over-voltage supply and voltage inversion. Designed for indoor and outdoor works.

Datasheet Buy now

Accelerometer

Accelerometer with a sensitivity of 100 mV/g, designed on aluminum with anti-aliasing filter, made for indoor and outdoor works. Short-circuits, over-voltage and reverse voltage protection

Its neodymium magnetic base is powerful to fix it in flat or rounded surfaces.


Datasheet Buy now

Ultra Low Noise
Accelerometer

Accelerometer with a sensitivity of 100 mV/g, designed on stainless steel for indoor and outdoor works. Includes anti-aliasing filter, powered with 18-30 VDC and 3-8 mA constant current.

Powerful neodymium magnets to fix it in flat or rounded surfaces.



Datasheet Buy now

Weight Scales

  • Accuracy 0.01g
  • Units G/ CT/ OZ/ OZT/ DWT/ GN
  • Display LCD 5 digits blue backlite
  • Power supply 2 AAA batteries
  • Inactivity turn off 3 minutes
  • Low battery alarm
  • Operation Temp. 10-40°C
  • Tare Function
  • Net weight 120 g
  • Dimensions 114 x 76 x 20 mm
  • Buy now

    Calibration Device

    Buy now

    Cable Extensions

    See on store

    Connection Adaptors

    See on store

    Software Upgrades

    See on store

     

     

    Mechanical Accessories & Replacements
    Negative Load Supports

    It’s an accessory required when balancing rotors are mounted on cantilever and/or to secure rotors with high levels of vibration, like crankshafts.

    Each support includes bearings and has adjustable height. Its dimensions may vary depending on the bearing suspensions.

    Axial Supports

    Designed to limit the axial rotor’s displacement on the Balancing Machines. It has 2 axes to adjust up to 1 meter shaft’s length from the supports.

    They include the mounting base to the balancing pedestal, an axial and radial arm and a rolling element at the tip.

    Transmission Belts
    Pulleys Kits

     

    For more accessories visit our online store